Jump to content

  •  





Recent Comments


- - - - -

TDK VeloCD Rewriter 16/10/40

Hardware CD

I bought my VeloCD Rewriter a little over 4 months ago. I did a good bit of researching on different CDRW drives. I wanted to get the fastest writer possible without spending too much money which of course who doesn't.
I finally decided on the VeloCD Rewriter because it was one of the fastest writers available at a price that was hard to beat, and the software bundle that came with it was something that I really liked. The software that came with my CDRW was Nero, and I think it is a very easy to use program.

Here are the specs:

Minimum System Requirements:
  • 233 MHz Intel Pentium processor or equivalent
  • 64MB RAM
  • 160 MB available hard disk space for software installation
  • 650 MB available hard disk space for temporary CD-image files (optional)
  • Available standard half-height drive bay Microsoft Windows 95B/98/98SE/ME/2000/NT
Performance Specifications:
  • Read/Write 40X read
  • 16X write
  • 10X rewrite
  • 32X audio rip
  • Burst Read 16.6 MB/sec
  • Data Buffer 2 MB with Buffer Underrun Protection
  • Spindle Motor Brushless
  • Error Rate Mode 1: 1 Block/1012 Bits
  • Mode 2: 1 Block/109 Bits
Disc Specifications:
  • Useable Formats: Read CD-DA, CD-ROM (Mode 1), CD-ROM XA (Mode 2: form 1 or form 2), CD-ROM (Mixed Mode), Photo CD, VideoCD, CD-I (MPEG movies), CD-Extra, CD Text
  • Useable Formats: Write ISO 9660-HFS, Rockridge, Photo CD, VideoCD, CD-I, CD-Extra (CD-Plus), Enhanced CD, CD-Text, CD-Midi
  • Disc Diameter 12 cm diameter (Recording time 74 and 80 min.)
  • Writing Modes Track-at-Once, Disc-at-Once, Session-at-Once, Multisession, Fixed and Variable Packet Writing
Front Panel:
  • Eject Eject Button, Manual Emergency Eject, Software Eject
  • Lights Disc in/Activity/Write
  • Disc Loading Auto
  • Headphone Jack Stereo mini-jack, 0.8V at 32 ohms
  • Volume Control Thumbwheel
  • CD Audio Controls Eject
Rear Panel:
  • Power Supply DC +5V at average 600mA (peak 1.1 A) DC +12V at average 500 mA (peak 1.5 A)
  • Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with ANSI X3T13/1153D (ATA/ATAPI-4). Supports 59 commands, including special comands for CD-R.
  • Audio Output Stereo analog output, Molex connector (L*G*G*R), MPC3 standard
  • Jumper Switches Master, slave, cable select
Dimensions and Weight:
  • Dimensions (W/H/D) 5.78" x 1.64" x 7.95" (146mm x 41.3mm x 202mm), excluding front panel
  • Weight 2.5 lbs (1.2 kg)
Reliability:
  • MTBF 30,000 - 60,000 POH (13% duty cycle) Tray Loading 20,000 - 75,000 Load Cycles



Testing

0 Comments